Products Specifications
| Condition | New |
|---|
SKU: MK28892
Best Seller
Magic KRX01.001 Korhex – Boot Glitch and MCU Access Tool for Flex
$2,433.33
Out of stock
Add to Wishlist
Add to Wishlist
Full Description:
Magic Korhex – Boot Glitch and MCU Access Tool for Flex
Magic Korhex – Boot Glitch and MCU Access Tool for Flex Product Description:
Magic KRX01.001 Korhex – Boot Glitch and MCU Access Tool for Flex expands the potential of the Flex ecosystem with a new hardware solution developed to simplify access to and unlocking of protected ECUs by working directly on the MCU
Tuning Tools From MAGIC
Product Number: MK28892
Product Weight: 1550g
Magic Korhex – Boot Glitch and MCU Access Tool for Flex Specs:
Manufacturer: MAGIC
Condition: New
MoreDetails:
Unlock the Power of Your Device with the Magic KRX01.001 Korhex
Introducing the Magic KRX01.001 Korhex – the ultimate Boot Glitch and MCU Access Tool specifically designed for Flex! Whether you're a seasoned technician or a tech enthusiast, this powerful tool enables you to dive deep into your device’s firmware and unlock its true potential. Say goodbye to limitations and hello to endless possibilities!
Magic Korhex Key Features & Benefits
-
Direct MCU access on supported ECUs
-
No component desoldering
-
No manual pin connection
-
Support for advanced Boot Glitch procedures
-
Full integration with the Flex ecosystem
How to choose:
For Flex Full Master and Full Slave customers, only the Korhex device needs to be purchased.
Flex customers who do not have a Full configuration must add the Boot Glitch software license FLS0.20 in addition to the Korhex hardware, or upgrade to Full.
What is Magic Korhex?
A Flex Add-On for Direct MCU Access
Korhex is a hardware add-on for Flex, designed for direct MCU access during supported ECU unlocking procedures. It works with Flex’s Boot Glitch workflow to simplify access to protected ECUs, reducing the need for board flipping, resistor desoldering and manual Boot pin wiring.
One contact point.
Less manual operations.
Unlocking a protected ECU usually means physical work before any software step: flipping the PCB, desoldering resistors, wiring Boot pins by hand. Each extra step adds time on the bench and risk of damage to the board. Korhex is built to simplify that stage, a single dedicated MCU contact point instead of manual rework.
| Exclusive Access | No Desoldering | No Manual Pin Wiring |
| Perform advanced operations on otherwise unavailable control units. | No need to remove resistors or make unnecessary hardware modifications. | Reduce physical preparation and eliminate manual Boot pin connection. |
THE KORHEX APPROACH
Deeper ECU Access
Korhex replaces manual bench preparation with a single MCU contact point, run through Flex.
The result isn’t just less prep time, it’s a new way to program control units: a revolutionary connection mode and an advanced access to highly requested, previously unavailable modules.
How it works Magic Korhex?
Korhex has been designed to integrate advanced hardware access directly into the Flex ECU programming workflow. It interacts directly with a specific contact point on the ECU microcontroller to enable the access required by supported advanced programming and unlocking procedures.
| 1 | 2 | 3 |
Connect & Position |
Access & Unlock |
Program |
| Prepare the ECU per the Flex-guided procedure and place Korhex on the designated MCU contact point via its dedicated masks. | Perform the required access and unlocking operation on supported ECUs - no desoldering, no manual Boot pin wiring. | Continue directly in Flex with the standard programming procedure. The workflow is now integrated end-to-end inside the Flex procedure you already use. |
Technical Specs — Reference Table
| Working mode | Boot Glitch |
| Compatible Flex configurations |
Full Master / Full Slave Flex Boot Glitch FLS0.20M/S |
| Vehicle & MCU coverage | See the full Vehicle List → |
| Operations | Read/Write Internal Flash, Read/Write Internal EEPROM, Full Backup, Boot Unlock |
| Software environment | Flex |
What is Magic Korhex?
Built for Advanced ECU Work
Korhex extends Flex’s existing Boot Glitch capability with dedicated hardware for direct MCU access, built to grow with new protocols, architectures and applications over time.
| Direct MCU Access Interact directly with the required MCU contact point on supported ECUs. |
Boot Glitch Technology Advanced unlocking procedures developed for protected control units. |
New MCU Perspectives Designed to support the evolution of modern automotive microcontrollers. |
| Flex Integration Dedicated procedures and guided workflows built into the Flex ecosystem. |
Enhanced Workflow Reduce physical preparation and simplify complex bench operations. |
Growing Coverage A platform designed for continuous protocol and application development. |
What do you need? Choose your Korhex setup?
What you need depends on your current Flex configuration
NEW CUSTOMER |
FULL CUSTOMER |
FLEX CUSTOMER |
| NOT A FLEX CUSTOMER YET? | ALREADY A FLEX FULL CUSTOMER? | NOT A FLEX FULL CUSTOMER YET? |
| If you’re not a Flex customer yet, all you need is the Flex Hardware, the Korhex Hardware and a software license to work seamlessly with these two products. | If you already have a Flex Full Master/Full Slave license and an active subscription, there is a special price only for you: buy the Korhex hardware via Helpdesk and start working. | If you’re not a Flex Full user, you can buy the Korhex hardware then upgrade your subscription to a Full license or add the Boot Glitch License FLS0.20 and you’re ready to go. |
| Flex Hardware + Korhex Hardware + Software License | Korhex Hardware | Korhex Hardware + Flex Software license |
Magic Korhex FAQ
- What is Korhex?
Korhex is a hardware extension for the Flex ECU and TCU programmer developed by Magicmotorsport. It enables advanced MCU access and ECU unlocking procedures through direct interaction with a designated microcontroller contact point on supported ECUs.
- What is Korhex used for?
Korhex is used during supported advanced ECU access procedures where direct interaction with the microcontroller is required. Depending on the ECU and Flex protocol, this can include Boot Glitch and other ECU unlocking procedures.
- Is Korhex an ECU programmer?
Korhex is not a standalone ECU programmer. It is a dedicated hardware extension of Flex. Flex manages the supported procedure and subsequent ECU programming operations.
- Is Korhex a standalone tool?
No. Korhex has been developed specifically for the Flex ecosystem and operates through dedicated procedures available in the Flex software.
- How does Korhex access an ECU microcontroller?
Korhex is positioned on a specific MCU contact point indicated by the corresponding Flex procedure. The hardware enables the required interaction with the microcontroller during supported access or unlocking operations.
- Do I need to desolder resistors?
Korhex is designed to avoid resistor desoldering on supported procedures where direct MCU contact can be used instead.
- Which ECUs are compatible with Korhex?
Compatibility depends on the ECU, microcontroller and Flex protocol. The list of supported applications is continuously updated through Flex releases and can be checked in the Flex Vehicle List.
- Do I need a specific Flex license to use Korhex?
Customers with a Flex Full Master or Full Slave configuration can use Korhex with the procedures included in their software package.
Customers without a Full configuration can purchase the Flex Boot Glitch License FLS0.20M/S to access supported Korhex procedures.
- How much does Korhex cost?
If you are a Flex Full Master/Full Slave customer with an active subscription, you only need the Korhex hardware. The special price of the Korhex device for Full customers with an active subscription is €1,990.
If you don’t have any active Flex Full Master/Full Slave license, the Korhex device costs €2,190. Plus, you’ll need the Flex Boot Glitch License FLS0.20M/S, available for €900.
- Will new ECUs be added?
Yes. Korhex has been designed as an evolving hardware platform. New supported applications and protocols released through the Flex ecosystem.
Magic Korhex Package Content
| Item | Description | Quantity |
|---|---|---|
| KRX02.001 | Korhex main device | 1 |
| KRX02.002 | External Korhex | 1 |
| KRX03.001 | Korhex USB cable | 1 |
| FLX4.9.1 | 3P Power Cord 1.20 m for FLX4.9 | 1 |
| FLX4.9A | European plug - Type E/F | 1 |
| FLX4.9B | UK plug - Type G | 1 |
| FLX4.9C | American plug - Type B | 1 |
| KRX02.003 | Korhex power supply | 1 |
| KRX02.004A | Korhex Antenna A | 2 |
| KRX04.001A | Korhex Mask A | 5 |
| KRX08.001 | Korhex carrying case | 1 |
Related products
-
MKON274+GIFTMAGIC Flex Full Slave FLS0.5S + Free Vapon VP996 Key Programming Tool Device
$3,544.44In stock -
MK26149Autotool / AutoShop REMAPTOOL PC New Version Remap and Tuning Device via Bluetooth
$381.00In stock -
MKON238Dfox Master Full OBD Light + Heavy + Pro+ Advanced ECU Programming Package
$5,333.33In stock
